www.megadrum.info

Hi.

The Megadrum do handle positional sensing over cc:16. You need a e-drum with a centralized piezo trigger mounted. (That the sensor is mounted in the middle of the drum)

Then you will need a positional sensing board( a MegaDRUM add on board) if your drum does not generate a positive half wave when triggering. (Could be a bit hard to determine...without a PS board)

If these requirements are met...the MD can handle PS for about 5 different drums.

Then we had your second part of the question...no I don't know any software where you are able add your own samples and also tag them to use Positional Sensing. The PS function works great in softwares like AD, SD, BFD etc...but they don't have the feature to add your own samples...

Angr77

Yes I think you would have to use a DAW to get this dream solution. That said, and I use timpani samples quite a bit, there are more variants with mallet types so you can't really cover all the bases all the time. I just change kits (nki in Kontakt) to an apropriate sample for the piece. I don't/can't use PS because my pads are so small but I do put the different artics on different pads (conga or bongo for example). Have you looked at Mandala http://synesthesiacorp.com

BFD3 lets you load your own samples. Might be a bit overkill if you just want it for some timpani samples though...

Aha. I did not Know that BFD3 could load own samples. That must be the way to go then...does it support PS for these samples as well?

Angr77

angr77 wrote:...does it support PS for these samples as well?

You got me there... I don't have BFD3 so I don't really know - I just know that it lets you use your own .wav samples. I can't see why it wouldn't let you assign notes for PS, but I suppose the best way to find out would be for the asker to shoot them an email.

As I'm sure most of you know, the mere ability to load samples is only the start. Can it sequence through groups, round robins and velocity layers? I have tried it in Kontakt with octoban samples and it's do able but time consuming.

glenn.szymanski wrote:greetings,

i've been using electronic drum pads and samplers since the mid-90s and very simple set ups in the digital world, mostly with Mainstage.

I acquired some cool freeware timpani samples and i want to trigger the center, 1/4, 1/2, edge samples according to where i hit on the head. i understand that the Roland pads and brain send CC#16, does Megadrum use this same technique?

I'm pretty sure that the Logic/Mainstage sampler won't respond to different samples using CC#16 and I can't load my own samples into Toontrack Superior Drummer 2.0.

What are my other options? I think I've read Battery may let you do this?

thank you!

I think you would be able to do this by "programming" a sfz-file and use it in a sfz-compliant player (free format and most players are free too).
Have a look in this forum for more about how to configure and control your samples:
http://www.plogue.com/phpBB3/viewforum. ... 07448e0a26
You can add them to different sample pools and randomize between them and make them controllable via CC-data etc.

glenn.szymanski wrote:not sure what you mean by overkill.

I meant to say it would be overkill if you were to just purchase/use BFD3 to play the timpani samples - if you're going to use the sounds that come with it too then all the better.

They call it the "The Deepest Sampled Drum Kit In The World" and its free:

http://forums.cockos.com/showthread.php?p=1414567
Legal note: (Nonexclusive, royalty free license).
These samples were recorded and created by me.
I'm offering these drums and cymbal samples to the
public royalty free (free of charge) to use in any audio/video production
for both commercial and private use. This is a "free use" license.
No payment is required to use these samples in any production.
License agreement is included in download package.

You may also use the photos of the drums and cymbals
royalty free in any commercial and private production.


Drum Files with corresponding TX16Wx-Project files for (also free downloadable) TX16Wx-Sampler.
http://forum.cockos.com/showthread.php?t=150868

Free TX16Wx-Sampler download:
http://www.tx16wx.com/

Sampler can be run with also free "VST Host" on PC or in a DAW as an VST instrument:
http://www.hermannseib.com/vsthost.htm

Only problem I wasn't able to find positional sensing samples in this beautiful drum lib that really sounds amazing to me.

A non-commercial licence for the TX16Wx Sampler (29€) will enable to configure or add own samples with:

• Group trigger switching
  
  • Note-on conditional triggering based on MIDI controllers, modulation or automation,
  • Round-robin, random, tempo and key-based conditions.

This means someone should invest for a non-commercial Licence of the TX16Wx and may add some positional snare sounds to the Ludwig samples.
If some snare PS wave files (with a free licence) can be found, I may try to do the configuration in the TX16Wx.



Any suggestions?

If that is the "The Deepest Sampled Drum Kit In The World" I'll eat my hat.